Kyocera SB-2HS-0035-A311 2 free download

File name SB-2HS-0035-A311_2.pdf

(Revised Issue 2) (Page.1/3) Service Bulletin Ref. No. 2HS-0035(A311) August 3, 2012 Measures against the Vertical Black Streak on Printout Subject (Change of the DK-130, DK-150 and DK-170) FS-1100, FS-1300D, FS-1350DN, FS-1120D, FS-1320D, Model l: FS-1370DN, FS-1028MFP, FS-1128MFP This time, the description with (-->) was revised from the previous information. The accurate serial numbers of the DK-150 were corrected. Phenomena Vertical black streaks might appear at 1 to 2 mm from the left edge on printout. This was caused by developing on the drum with light from laser scaner unit reflected by the shutter spring in the drum unit. Content of Changes As the measure, the shape of the shading sheet (SEAL DRUM FRAME) attached to the left side of the FRAME DRUM was changed so that light will not be reflected by the shutter spring in the drum unit. FRAME DRUM SEAL DRUM FRAME of left side Shape of the SEAL DRUM FRAME changed [Old] [New] DK-130 24.5 mm 16 mm (Attention) The shape of the SEAL DRUM FRAME on left side only was changed and the part name was changed to SEAL DRUM FRAME B. The SEAL DRUM FRAME B is a component part of the drum and it is not individually supplied. Com pati- Old Part New Part Q'ty bility No. No. No. Description SP Remarks Old New Old New Affected models:FS-1350DN/FS-1120D/ FS-1028MFP/KM-2810/FS-1128MFP/KM-2820 302H493010 302H493011 1 DK-150 O O 1 1 O